General
Reydisp Manager 2 is a PC operating program. It is the engineering and operating tool for all 7SR5 protection
devices. The user can perform all configuration tasks offline from the PC without needing a 7SR5 device. All
data can be transferred to the device online at a later date – for example, via a direct USB connection or a
communication network. More information is available in the Engineering Guide.
Reydisp Manager 2 is available to download free of charge from
https://www.siemens.com/reyrolle directly.
Download package Reydisp Manager V02.XX should be used for the installation of Reydisp Manager 2.
Reydisp Manager 2 uses templates to update and configure 7SR5 devices. The templates need to be installed
in Reydisp Manager for any required device type and version. All device templates must be installed separately
for the required PC software and device type. Template installers are also available to download from the
Siemens web page e.g. 7SR5_DeviceFW-V2.10CFG-V2.10_RDT-V2.10.exe
[sc_7SR5_ReydispManager2ProjectStructure, 2, --_--]
Figure 5-1 Project View of Reydisp Manager 2 (Main Screen)
It provides the following features:
•
Configure device functionality
•
Configure device settings
•
Create and edit logic diagrams
•
Create user defined single lines and mimic diagrams for HMI screens
5.1
Using Reydisp Manager 2
5.1 General
60 Reyrolle 7SR5, Operating, Manual
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
