Siemens Reyrolle 7SR5 - Changing the Language on the Device Display

[sc_7SR5_EthernetTimezone, 1, --_--]
Figure 6-7 Ethernet Timezone
Table 6-1 Timezone Settings
Setting Description
Time zone offset to UTC This should be set to the offset to UTC
No summer time switchover Selecting this results in the time remaining the same
throughout the year. If this is ticked, the options
below it relating to summer time are disabled.
Summer time offset to GMT This should be set to the offset to GMT for summer
time.
Start of Summer Time The time daylight savings start
End of Summer Time The time daylight savings ends
Changing the Language on the Device Display
The language of the text displayed on the device LCD can be selected and supports multi language capability.
To reach the language selection menu, go to Main Menu > Settings > Configuration > Device, and select
Language Setting.
Press the Enter button to change language, then by using ▲,▼ buttons select the desired language from the
list.
The languages available are:
•
English
•
French
•
German
•
Portuguese
•
Spanish
•
Turkish
After confirming setting changes, the device will restart with the new language on the LCD display.
6.5.6
Commissioning
6.5 Device Configuration
90 Reyrolle 7SR5, Operating, Manual
C53000-B7040-C013-1, Edition 05.2021