[sc_7SR5_DeviceWindow, 1, --_--]
Figure 7-3 Device Window
Offline Operation Using Reydisp Manager 2
Offline operation offers you the ability to carry out complete configurations and extensive parameterization of
a device. Once you have finished all settings, you can load the configuration from the Reydisp Manager 2 PC
to the device. If the loading operation was successful, the device restarts automatically.
Typical Applications of Offline Configuration
²
Creating a configuration by selecting a suitable application template and subsequently adjusting the
settings to the individual conditions
NOTE
It is not recommended to update a device when in service/operation.
²
Reusing a standardized configuration in multiple devices
²
Extensive changes in configurations and setting parameters
NOTE
For a device to be editable offline, you must first have created it in a project. After successful loading of the
configuration, the device restarts automatically.
Procedure
²
From the project tree, select the project containing the device to be operated.
²
Select the respective device within the project.
²
Open the related menu on the right side of the working area, Configuration and Tasks.
²
You can now carry out configurations and settings in offline mode.
Using the On-Site Operation Panel
You can operate the device directly on the on-site operation panel even without a Reydisp Manager 2 PC. A
standard large LDC display, push buttons, and function keys are available to you for this purpose.
LEDs allow the display of binary output signals.
7.3.3
7.3.4
In Service Operation
7.3 Operation Options
100 Reyrolle 7SR5, Operating, Manual
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
