Procedure
²
Establish a PC connection to a 7SR5 device via a communication interface.
²
Create a device by right-clicking on the existing project name and selecting New 7SR5 device.
Select Import connected device to import a copy of the connected device.
[sc_7SR5_AddingADevice, 1, --_--]
Figure 7-1 Adding a Connected Device in Reydisp Manager 2
²
Select connection type USB or IP address from the rear port in the Communication Settings window and
click the Next button.
Click the Finish button after device is created.
[sc_7SR5_CreatingADeviceWindow, 1, --_--]
Figure 7-2 Creating Device Windows
²
Select the device from the project tree on the left.
The basic information is displayed below the device.
You can find the following tabs in the menu item Device Information:
Device information
User Settings
Function Configuration
In Service Operation
7.3 Operation Options
Reyrolle 7SR5, Operating, Manual 99
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
