[sc_7SR5_EN100WebUI, 1, --_--]
Figure 9-7 Accessing the Security Log
The state of the security log last loaded from the device is displayed.
•
The maintenance password must be entered prior to access to the security log being granted.
[sc_7SR5_SecurityLog, 1, --_--]
Figure 9-8 Reading the Security Indications with Internet Browser
Reading on the Device through the On-Site Operation Panel
•
To access the security log from the main menu, use the navigation keys of the on-site operation panel.
Main Menu -> Security log
•
To access the Security log the Security log access ID must be active and entered using the fascia keys. The
Security log access ID is set and activated in Reydisp Manager in the setting parameter file.
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
Security Settings
9.9 Recording of Cyber-Security Events
Reyrolle 7SR5, Operating, Manual 145
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
