[sc_7SR5 Fascia - Example Mimic Displays, 2, --_--]
Figure 4-19 Control Display
A ready-to-run device can display a user defined plant control mimic after booting. By pressing the Enter
button, function key 1, or function key 0 buttons, you get to the control display defined as standard. By
pressing the Enter button and using the up or down buttons, you get to the control mode of the currently
displayed control display.
If there are multiple displays, the Navigation (right arrow) buttons is used to display the different screens. If
several controllable objects exist on a single screen, pressing Enter and using the up or down keys allows the
user to toggle between different objects. After pressing function key 1 or function key 0, a confirmation
screen appears to activate the control function. Control mode is reset after a switching procedure or after a
period of 30 seconds time duration without a switching operation or confirmation.
Using the Device Fascia
4.3 Displays for Indication and Control
50 Reyrolle 7SR5, Operating, Manual
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
