Loading of the configuration from the Reydisp Manager 2 project to the device is then initiated showing
Figure 5-14. The offline configuration is thereby transferred to the device once Complete is shown at the
end. After a successful transfer, the device will restart.
When uploading settings to the device, Reydisp Manager 2 checks that the settings are compatible with the
designated device. If they are incompatible the settings are not uploaded to the device. There will be warning
messages displayed in red on the information window without the word Complete. The user should check
these incompatible settings.
Using Reydisp Manager 2
5.3 Transmitting the Configuration to a 7SR5 Device for the First Time
Reyrolle 7SR5, Operating, Manual 71
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
