[sc_7SR5_ConfirmationID, 1, --_--]
Figure 6-10 Confirmation ID
Activate or deactivate a confirmation ID by clicking on it and selecting Set to open the change window.
To change a confirmation ID, enter a new 4 character alpha-numeric code into the boxes and click the apply
button.
A user identifier code is required for settings changes at the device fascia. The Setting ID is set in Reydisp
Manager (Configuration > Device > Settings Confirmation ID > Set).
Settings changes can only be made at the device fascia after the Setting ID code is entered.
The Setting ID will timeout 60 minutes after the last key press, or if the Control ID is entered.
A user identifier code is required to carry out control operations from the device fascia. The Control ID is set in
Reydisp Manager (Configuration > Device > Control Confirmation ID > Set).
Settings changes can only be made at the device fascia after the Setting ID code is entered.
The Control ID will timeout 60 minutes after the last key press, or if the Control ID is entered.
A user identifier code is required for settings changes at the device security log. The Security Log Confirmation
ID is set in Reydisp Manager (Configuration > Device > Security Log Confirmation ID > Set).
The security log can only be viewed at the device fascia after the Security Log Confirmation ID has been
entered.
After activating a confirmation ID, when using the front fascia menu, the user can access settings by entering
the ID using â–²or â–¼ buttons.
[sc_7SR5_ConfirmationIDWindow, 1, --_--]
Figure 6-11 Confirmation ID Display
Commissioning
6.5 Device Configuration
92 Reyrolle 7SR5, Operating, Manual
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
