Scope of Application
The RS232 fiber-optic converter converts serial RS232 full duplex signals into an fiber-optic connection. It has
one fiber-optic channel each for the transmit and receive directions and an RS232 interface. As a result, the
converter can be connected directly to the serial user, system, or service interface of SIPROTEC devices for
transmission rates of up to 115 200 baud.
The RS232 fiber-optic converter is designed for use in switchgear and enables the galvanically separated,
interference-free transmission of serial signals to a central controller, a star coupler, or a PC. A wide-range
power supply unit is integrated in the housing. This unit generates the voltage needed by the converter
printed circuit board from the auxiliary power.
The RS232 fiber-optic converter 7XV5652-0CA00 can be operated in a hybrid configuration with the prede-
cessor model 7XV5652-0BA00.
1.1
Overview
1.1 Scope of Application
10 Accessories, RS232 Optical Fiber Converter 7XV5652-0CA00, Manual
C53000-G9050-C606-1, Edition 03.2020
To Next Page
Loading...
Need help?
General
