Functional Units
The signal converters are tested functional units hardwired in the housing. The device has a snap-on fastener
for a 35-mm DIN rail as per DIN EN 50022. The auxiliary power supply can be safely connected to the
terminals. The RS232 input is connected via a 9-pin D-sub socket. The fiber-optic channel is adapted using ST
connectors. The device contains no silicone, is halogen-free and flame-resistant.
2.1
Device Structure
2.1 Functional Units
14 Accessories, RS232 Optical Fiber Converter 7XV5652-0CA00, Manual
C53000-G9050-C606-1, Edition 03.2020
To Next Page
Loading...
Need help?
General
