Siemens S7-1500 - Page 59

Technical specifications
6.7 Technical specifications for terminal modules
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,
59
Table 6- 10 Technical specifications for terminal module TPF with LED
Terminal modules TPF (use), 3-wire initiators with LED, incl. fuse in the signal path
6ES7924-0CL20-0Bx0
Type of supply voltage
DC
Operating voltage max. 24 V
Max. permissible continuous current per signal
1 A (limited with 0.6 A microfuse)
Max. permissible total current (power supply)
4 A / byte
Fuse
Factory fittings 5 mm x 20 mm microfuse
0.6 A / 250 V quick-response
General data
Connection to SIMATIC fitted for
16-pin IDC connector with fitted strain relief
Operating temperature
0 to + 60° C
Mounting position
Any
Clearances and creepage distances IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,0
overvoltage category II,
pollution degree 2
Dimensions (W x H x D) in mm
For 3-wire initiators with fuse 6ES7924-0CL20-
0Bx0
Approx. 57 x 76 x 60