Siemens S7-1500 - Page 67

Technical specifications
6.7 Technical specifications for terminal modules
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,
67
Table 6- 19 Technical specifications for terminal module TPA
Terminal modules TPA, 50-pin, for analog modules in S7-1500 or ET200MP
6ES7924-2CC20-0Ax0 series
Type of supply voltage
DC
Operating voltage max. 50 V
Max. permissible continuous current per signal
line
1 A
Connection to SIMATIC fitted for
50-pin IDC connector with fitted strain relief
Operating temperature
0 to + 60° C
Mounting position
Any
Clearances and creepage distances IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
pollution degree 2
Dimensions (W x H x D) in mm
For analog modules 6ES7924-2CC20-0Ax0 Approx. 130 x 76 x 60