Siemens S7-1500 - Page 66

Technical specifications
6.7 Technical specifications for terminal modules
SIMATIC TOP connect for S7-1500 and ET200MP
66 Manual,
Terminal modules for 50-pin connecting cable
Table 6- 17 Technical specifications for terminal modules TP1 and TP3 without LED
Terminal modules TP1 and TP3, 50-pin
1-wire connection without LED 6ES7924-2AA20-0Ax0
3-wire initiators without LED 6ES7924-2CA20-0Ax0
Type of supply voltage
DC
Operating voltage max. 50 V
Max. permissible continuous current per signal
1 A
Max. permissible total current (power supply)
2 A / byte
Connection to SIMATIC fitted for
50-pin IDC connector with fitted strain relief
Operating temperature
0 to + 60° C
Mounting position
Any
Clearances and creepage distances IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
Overvoltage category II,
pollution degree 2
Dimensions (W x H x D) in mm
1-wire connection 6ES7924-2AA20-0Ax0
Approx. 100 x 76 x 60
For 3-wire initiators 6ES7924-2CA20-0Ax0 Approx. 175 x 76 x 60
Table 6- 18 Technical specifications for terminal modules TP1 and TP3 with LED
Terminal modules TP1 and TP3, 50-pin
1-wire connection with LED 6ES7924-2AA20-0Bx0
3-wire initiators with LED 6ES7924-2CA20-0Bx0
Type of supply voltage
DC
Operating voltage max. 24 V
Max. permissible continuous current per signal
1 A
Max. permissible total current (power supply) 2 A / byte
Connection to SIMATIC fitted for
50-pin IDC connector with fitted strain relief
Operating temperature
0 to + 60° C
Mounting position
Any
Clearances and creepage distances IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
pollution degree 2
Dimensions (W x H x D) in mm
1-wire connection 6ES7924-2AA20-0Bx0
Approx. 100 x 76 x 60
For 3-wire initiators 6ES7924-2CA20-0Bx0
Approx. 175 x 76 x 60