Siemens S7-1500 - Page 65

Technical specifications
6.7 Technical specifications for terminal modules
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,
65
Terminal module TPOo optocoupler for outputs
6ES7924-0BF20-0Bx0
Voltage V
SF1
, V
SF2
No error at the switching output
Typ. Vop – 2 V
Wire break at the switching output
Approx. 0 V
Short-circuit at the switching output
0 V to V
op
, clocked
Current I
SF1
, I
SF2
min. 4 mA/max. 200 mA
General data
Connection to SIMATIC fitted for
16-pin IDC connector with fitted strain relief
Degree of protection
IP20
Operating temperature
0 … 60 °C
Mounting position
Any, except overhead
Connecting terminals
Screw-type terminal or push-in system
Stripped length
9 mm
Conductor cross-section
Finely stranded without end sleeve
0.5 … 2.5 mm
2
With end sleeve for screw-type terminals 0.5 ... 2.5 mm
2
in accordance with DIN 46222-1
With end sleeve, push-in system
0.2 … 2.5 mm
2
Screwdriver
According to DIN 5264 B 0.6 x 3.5 mm
Tightening torque of screw-type terminals
0.4 … 0.7 Nm
Weight
Screw model
0.29 kg
Push-in model
0.25 kg
Clearances and creepage distances IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
pollution degree 2
Dimensions (W x H x D) in mm
6ES7924-0BF20-0Bx0
Approx. 130 x 76 x 60