Siemens S7-300 - Configuration Example for the Address Areas in Transfer Memory

&RPPLVVLRQLQJ
S7-300 Automation System, Hardware and Installation: CPU 312IFM - 318-2 DP
9-30 A5E00203919-01
The table below shows the principle of address areas. You can also find this figure
in the 67(3 configuration.
Table 9-10 Configuration example for the address areas in transfer memory
7\SH0DVWHU
DGGUHVV
7\SH 6ODYH
DGGUHVV
/HQJW
K
8QLW &RQVLVWHQF\
1 E 222 A 310 2 Byte Unit
2 A 0 E 13 10 Word Total length
:
32
Address areas in the
DP master CPU
Address areas in the
DP slave CPU
These address area parameters
must be identical for DP master and
DP slave