Siemens S7-300 - Module Accessories

,QVWDOODWLRQ
S7-300 Automation System, Hardware and Installation: CPU 312IFM - 318-2 DP
6-2 A5E00203919-01
$FFHVVRULHVLQFOXGHG
Installation accessories are included with the module package. The appendix
contains a list of accessories and spare parts together with the corresponding
order numbers.
Table 6-1 Module accessories
0RGXOH $FFHVVRULHVLQFOXGHG 'HVFULSWLRQ
1 x Slot number label For assigning slot numbers
2 keys
(only for CPUs with a key
switch, such as the CPU
318-2 DP)
The key is used for
operating the CPU's mode
selector switch
CPU
Inscription labels For labeling the integrated
inputs and outputs (CPU
312 IFM, 314 IFM) with the
MPI address and firmware
version
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID
11978022.
1 bus connector For electrical interconnection
of modules
Signal module (SM)
Function Module (FM)
1 labeling strip for labeling module I/Os
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID 406745.
1 bus connector For electrical interconnection
of modules
Communication module (CP)
1 inscription label
(only CP 342-2)
for labeling the connection to
the PLC interface
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID 406745.
Interface module (IM) 1 x Slot number label (only
IM 361 and IM 365)
For assigning slot numbers
on racks 1 to 3