Siemens SCALANCE MUM853-1 - Power Supply Connection

WARNING
Restricted area of application
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.
6.2 Power supply
WARNING
Impermissible power supply
Never operate the device with AC voltage or DC voltage higher than 32VDC.
Note
The device can be disconnected from the power supply by removing the terminal block.
The power supply is connected using a 5-pin plug-in terminal block. The power supply is
non-󹪞oating.
0
0
/
/
Contact Assignment
L1+ 24 VDC
M1 Ground
M2 Ground
Connection
6.2Power supply
SCALANCE MUM853-1
50 Operating Instructions, 03/2023, C79000-G8976-C650-05