11.4 General approvals
Appr
ovals issued
Note
Is
sued approvals on the type plate of the device
The specied approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
Approvals for shipbuilding are not printed on the device type plate.
ATEX, IECEx, UKEX and CCC Ex cer
tication
WARNING
Risk of explosion in hazardous areas
When using SIMA
TIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous Area".
You will nd this document
• on the data medium that ships with some devices.
• on the Internet pages under Siemens Industry Online Support (
https://
support.industry.siemens.com/cs/ww/en/view/78381013).
Ent
er the document identication number C234 as the search term.
The markings of the electrical devices are:
II 3GEx ec IIC T4 Gc
DEKRA 18A
TEX0026 X
DEKRA 21UKEX0002 X
IECEx DEK 18.0018X
Importer UK:
Siemens plc,
Manc
hester
M20 2UR, UK
(Ex na IIC T4 Gc, no
t on the nameplate)
Approvals
11.4General approvals
SCALANCE MUM853-1
Operating Instructions, 03/2023, C79000-G8976-C650-05 83