Approvals
11
Approvals issued
Note
Issued approvals on the type plate of the device
The specied approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
Approvals for shipbuilding are not printed on the device type plate.
Current approvals on the Internet
You will nd the current approvals for the product on the Internet pages of Siemens Industry
Online Support at the following link: (https://support.industry.siemens.com/cs/ww/en/ps/
15982/cert)
National approvals
You can nd an overview of the country-specic wireless approvals of SIMATICNET devices on
the Internet pages of Siemens Industry Online Support. You can nd the link to the document on
the following page
ik-Info (https://www.siemens.com/mobilenetwork-approvals)
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
• "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual (https://
support.industry.siemens.com/cs/ww/en/view/27069465)
• "Industrial Ethernet / PROFINET - Passive Network Components" System Manual (https://
support.industry.siemens.com/cs/ww/en/view/84922825)
• "EMC Installation Guidelines" conguration manual (https://
support.industry.siemens.com/cs/ww/en/view/60612658)
SCALANCE MUM853-1
Operating Instructions, 03/2023, C79000-G8976-C650-05 75