Introduction
1.1 Preface X400
SCALANCE X-400
8 Operating Instructions, 06/2015, C79000-G8976-C186-12
● Extender module EM495-8
order number: 6GK5 495-8BA00-8AA2
● Extender module EM496-4
order number: 6GK5 496-4MA00-8AA2
Names of the devices in these operating instructions
The descriptions in these operating instructions always apply to the devices of the
SCALANCE X-400 product line listed under "Validity of the Operating Instructions" in this
document unless the description relates to a specific device of the product line. In the
remainder of the description, the devices are called
.
For help on configuration and diagnostics using Web-based management, the CLI command
line, or SNMP, refer to the following documentation:
● SCALANCE X-300 SCALANCE X-400 Configuration Manual
C79000-G89xx-C187-06
(xx = German 00, English 76, French 77, Italian, 72 Spanish 78)
This configuration manual is available on the following media:
– On the supplied CD
– On the Internet at the address
http://support.automation.siemens.com/WW/view/xx/19625108
(xx = German 00, English 76, French 77, Italian 72, Spanish 78)
● SIMATIC NET Twisted Pair and Fiber Optic Networks
This manual is available on the following media:
– In paper form under the order number C79000-G89xx-C125
(xx = German 00, English 76, French 77, Italian 72, Spanish 78)
– On the Internet at the address
http://support.automation.siemens.com/WW/view/xx/8763736
(xx = German de, English en, French fr, Italian it, Spanish es)
The IE Switches X-400 meet the requirements for the CE mark. For more detailed
information, refer to the appendix of these Operating Instructions.
To Next Page
Loading...
