6.4 Connecting the switch
Procedure for connecting the device
Follow the steps below to connect the device:
1. Turn off the power supply.
2. Connect the grounding of the switch according to the following description.
3. Connect the signaling contact of the switch according to the following description.
4. Connect the power supply of the switch according to the following description.
5. Connect the network nodes / subnets to the switch.
6. Turn on the power supply for the switch.
Connecting
6.4 Connecting the switch
SCALANCE X-300
Compact Operating Instructions, 11/2019, A5E00982643-18 53
To Next Page
Loading...
Need help?
General