Connecting
7.2 Main connection types for fixed mounting
3VL IEC molded case circuit breakers
100 System Manual, 11/2013, 110 0110 - 02 DS 03
Box terminals (copper cables or bars)
The VL160X to VL250 can be supplied optionally with box terminal or with screw-type
connection. The terminal is designed to connect either a conductor or a solid/flexible copper
bar.
Box terminals with solid/flexible copper bars
or cables
For additional information, refer to the technical data in the chapter Configuration of main
connections (Page 136).
Connecting bars are used to connect the circuit breakers to busbars or cables in electrical
systems. Front connecting bars are supplied with the SENTRON VL1600 as standard.
Phase barriers are also included. Extended terminal covers can be fitted if necessary.
Use of front connecting bars
For additional information, refer to the technical data in the chapter Configuration of main
connections (Page 136).
To Next Page
Loading...
