Siemens SENTRON 3VL series - Main Connection Types for Fixed Mounting

Connecting
7.2 Main connection types for fixed mounting
3VL IEC molded case circuit breakers
System Manual, 11/2013, 110 0110 - 02 DS 03
99
7.2
Main connection types for fixed mounting
Main conductor connection for SENTRON 3VL fixed-mounted version
There are various methods of connecting the molded case circuit breaker main conductors
for fixed mounting.
Network connection
The 3VL molded case circuit breakers can be supplied with power from above and below.
Multiple feed-in terminal for circular conductors (copper/aluminum)
The multiple feed-in terminals for incoming supply and outgoing feeders consist of an
aluminum body with tin coating to prevent oxidation. Both aluminum and copper cables may
be used. Only one conductor is permitted per terminal. The multiple feed-in terminals are
available for the VL400 to VL1250 molded case circuit breakers.
Multiple feed
-in terminals
Use of multiple feed-in terminals
For additional information, refer to the technical data in the chapter Configuration of main
connections (Page 136).