Siemens SENTRON 3VL series - Page 162

Technical data
11.12 Shunt release
3VL IEC molded case circuit breakers
162 System Manual, 11/2013, 110 0110 - 02 DS 03
Table 11- 41 Shunt release for VL630 to VL1600
VL630
VL800
VL1200
VL1600
Response voltage:
Pick-up (circuit breaker
trips) [V]
0.7-1.10 U
s
0.7-1.10 U
s
0.7-1.10 U
s
0.7-1.10 U
s
Power consumption
AC 50 / 60 Hz [VA]
24
480
480
480
480
48-60 V
401 - 501
401 - 501
401 - 501
401 - 501
110-127 V
424 - 489
424 - 489
424 - 489
424 - 489
208-277 V
533 - 736
533 - 736
533 - 736
533 - 736
380-600 V
408 - 645
408 - 645
408 - 645
408 - 645
DC [W]
24 V
594
594
594
594
48-60 V
740 - 925
740 - 925
740 - 925
740 - 925
110-127 V
559 - 648
559 - 648
559 - 648
559 - 648
220-250 V
722 - 820
722 - 820
722 - 820
722 - 820
Max. in-service period [s]
Interrupts automatically
Max. opening time [ms]
20
20
20
20
Fuse (slow)
[A]
Molded case circuit breaker,
[A]
C characteristic
4
(AC 24, 48-60, 110-127 V, 208-277 V)
2
(all others)
5
Note
The power consumption
of the shunt releases for approx. 20 ms should be taken into
account when selecting the power supply for the control circuit, for example by means of a
corresponding short
-time overload capability of the power supply used.