The mechanical installation of the geared motor is performed in the following steps:
1. Mount the geared motor on the rubber-metal anti-vibration motor mounting.
[0[
[0[
DE
a SIDOOR M3 / MDG3
b SIDOOR M4 / MDG4 / M5 / MDG5
Then, if required, mount the motor mounting (rubber-bonded metal) on the mounting
bracket.
DE
[0[
[0[
a SIDOOR M3 / MDG3
b SIDOOR M4 / MDG4 / M5 / MDG5
2. Mount the deector unit, if necessary with a mounting bracket.
Geared motors
6.2 Installation
ATD4xxW for industrial applications
206 System Manual, 06/2022, A5E51901827B AA
To Next Page
Loading...
