CAUTION
Material damage
The connection cables of t
he transformer cannot be replaced.
• Scrap the unit if the line is damaged.
Procedure
Pr
oceed as follows to install the transformer:
Steps Figure
1. Drill the hole for the screw ① as sho
wn in the
dimension drawing.
2. Secure the transformer with 1 screw (M6, mini‐
mum lengt
h 70 mm) ① on a at metal surface.
Power supply
7.3 SIDOOR TRANSFORMER UL
ATD4xxW for industrial applications
252 System Manual, 06/2022, A5E51901827B AA
To Next Page
Loading...
