Siemens SIDOOR ATD401W - Page 284

Function Description
Con󹪝guration of the SIDOOR control unit
• Con󹪝guration of the driving pro󹪝le
• Exporting and importing driving pro󹪝le parameters
• Importing and exporting of maintenance data
• De󹪝nition of parameter favorites
Command output to the SIDOOR control unit
• Drive commands: Open, Close, Stop, Deenergize
• Start of the learn run with new motor
• Start of the learn run without weight determination
• Restore factory settings
• Activate test run
• Loading parameter default values
SIDOOR Firmware Update
• Save the SIDOOR 󹪝rmware on the SIDOOR LINK
• Update the SIDOOR control unit with the saved SIDOOR
󹪝rmware on the SIDOOR LINK.
Note
Detailed description of functions
For a detailed description of the SIDOOR SUPPORT app functions, see SIDOOR SUPPORT App
Function Manual (https://support.industry.siemens.com/cs/de/de/view/109802679/en),
A5E51332023.
Note
Input of door commands via digital inputs blocked
If you control the SIDOOR control unit via the SIDOOR SUPPORT app, the transmission of door
commands via the digital inputs of the X6 terminal strip is blocked.
Optional additional units
8.2 SIDOOR LINK and SIDOOR SUPPORT App
ATD4xxW for industrial applications
282 System Manual, 06/2022, A5E51901827B AA