Siemens SIMATIC 6DL1 136-6AA00-0PH1 - Configuration options

Parameters/address space
5
5.1 Con󹪝guration options
De󹪝nition
There are 󹪝xed input and output address ranges that are used in the I/O system.
Con󹪝guring
The following software is required to con󹪝gure the I/O module:
• S7 F-Systems V6.4 (or higher)
Con󹪝guration options
When con󹪝guring is done in HW Con󹪝g, the con󹪝guration is carried out indirectly in the
parameter assignment dialog of the module.
F-AI 8xI 2-/4-wire HART HA
Equipment Manual, 09/2021, A5E50557845-AA 21