Siemens SIMATIC 6DL1 136-6AA00-0PH1 - Page 90

Article number 6DL1136-6AA00-0PH1
General information
Product type designation F-AI 8xI 2-/4-wire HART HA
Firmware version V1.0.0
• FW update possible
Yes
Color code for module-speci󹪝c color identi󹪝ca‐
tion plate
CC00
Product function
• I&M data
Yes; I&M0 to I&M3
Redundancy
• Redundancy capability
Yes; with TB type F1
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption (rated value) 90 mA; without sensor supply
Encoder supply
Number of outputs 8
Short-circuit protection Yes
24 V encoder supply
• 24 V
Yes
• Short-circuit protection
Yes
• Output current per channel, max.
30 mA
Power
Power available from the backplane bus 90 mW
Power loss
Power loss, typ. 2.8 W
Address area
Address space per module
• Inputs
22 byte
• Outputs
5 byte
Analog inputs
Number of analog inputs
• For current measurement
8; destruction limit for current input 35 mA
Input ranges (rated values), currents
• 0 to 20 mA
Yes
– Input resistance (0 to 20 mA)
150 Ω
• 4 mA to 20 mA
Yes
– Input resistance (4 mA to 20 mA)
150 Ω
HART communication
• Primary Master
Yes
Technical speci󹪝cations
9.1 Technical speci󹪝cations
F-AI 8xI 2-/4-wire HART HA
90 Equipment Manual, 09/2021, A5E50557845-AA