Siemens SIMATIC ET 200AL - Pin Assignments (DQ16 Mode); DQ16 Mode Pinout

Configuration modes for digital inputs/outputs
3.2 Wiring
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
Manual, 03/2019, A5E38688112-AC
17
Table 3- 2 Pin assignment for digital inputs/digital outputs
Pin
Assignment
Front view of the sockets
X14 to X17 sockets for digital inputs / outputs
X14, X16
X15, X17
1 24 V encoder supply 2U
S
(derived from 2L+ switched)
2 Input/output signal DIQ
9
: Connector X14
Input/output signal DIQ
11
: Connector X15
Input/output signal DIQ
13
: Connector X16
Input/output signal DIQ
15
: Connector X17
3 Ground 2M
4 Input/output signal DIQ
8
: Connector X14
Input/output signal DIQ
10
: Connector X15
Input/output signal DIQ
12
: Connector X16
Input/output signal DIQ
14
: Connector X17
5
Functional earth FE
Pin assignment of the sockets for digital inputs/digital outputs in the configuration mode DQ16
The tables below show the pin assignments of the 8 sockets for connection of the digital
inputs/digital outputs in the configuration mode DQ16.
In this configuration mode, socket pins 2 and 4 are always permanently assigned to output
signals.
Table 3- 3 Pin assignment for digital inputs/digital outputs
Pin
Assignment
Front view of the sockets
X10 to X13 sockets for digital inputs / outputs
X10, X12
X11, X13
1 24 V encoder supply 1U
S
(derived from 1L+ non-switched)
2 Output signal DQ
1
: Connector X10
Output signal DQ
3
: Connector X11
Output signal DQ
5
: Connector X12
Output signal DQ
7
: Connector X13
3
Ground 1M
4 Output signal DQ
0
: Connector X10
Output signal DQ
2
: Connector X11
Output signal DQ
4
: Connector X12
Output signal DQ
6
: Connector X13
5
Functional earth FE