Siemens SIMATIC ET 200AL - Pin Assignments (DI8;DQ8 Mode); DI8;DQ8 Mode Pinout

Configuration modes for digital inputs/outputs
3.2 Wiring
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
18 Manual, 03/2019, A5E38688112-AC
Table 3- 4 Pin assignment for digital inputs/digital outputs
Pin
Assignment
Front view of the sockets
X14 to X17 sockets for digital inputs / outputs
X14, X16
X15, X17
1 24 V encoder supply 2U
S
(derived from 2L+ switched)
2 Output signal DQ
9
: Connector X14
Output signal DQ
11
: Connector X15
Output signal DQ
13
: Connector X16
Output signal DQ
15
: Connector X17
3 Ground 2M
4 Output signal DQ
8
: Connector X14
Output signal DQ
10
: Connector X15
Output signal DQ
12
: Connector X16
Output signal DQ
14
: Connector X17
5
Functional earth FE
Pin assignment of the sockets for digital inputs/digital outputs in the configuration mode DI8/DQ8
The tables below show the pin assignments of the 8 sockets for connection of the digital
inputs/digital outputs in the configuration mode DI8/DQ8.
In this configuration mode, pins 2 and 4 for the sockets X10 to X13 are always permanently
assigned to the input signals, pins 2 and 4 for the sockets X14 to X17 are always
permanently assigned to the output signals.
Table 3- 5 Pin assignment for digital inputs/digital outputs
Pin
Assignment
Front view of the sockets
X10 to X13 sockets for digital inputs / outputs
X10, X12
X11, X13
1 24 V encoder supply 1U
S
(derived from 1L+ non-switched)
2 Input signal DI
1
: Connector X10
Input signal DI
3
: Connector X11
Input signal DI
5
: Connector X12
Input signal DI
7
: Connector X13
3
Ground 1M
4 Input signal DI
0
: Connector X10
Input signal DI
2
: Connector X11
Input signal DI
4
: Connector X12
Input signal DI
6
: Connector X13
5
Functional earth FE