Siemens SIMATIC ET 200AL - Digital Output Specifications; Output Specifications and Switching Properties

Technical specifications
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
78 Manual, 03/2019, A5E38688112-AC
Article number
6ES7143-5AH00-0BA0
for technological functions
– parameterizable
Yes
Cable length
• unshielded, max.
30 m
Digital outputs
Number of digital outputs
16; Parameterizable as DIQ
• in groups of
8; 2 load groups for 8 outputs each
Short-circuit protection
Yes; per channel, electronic
• Response threshold, typ.
0.7 A
Limitation of inductive shutdown voltage to
L+ (-53 V)
Digital output functions, parameterizable
• Switching tripped by comparison values
Yes
• Freely usable digital output
Yes
Switching capacity of the outputs
• on lamp load, max.
5 W
Load resistance range
• lower limit
48 Ω
• upper limit
4 kΩ
Output voltage
• for signal "1", min.
L+ (-0.8 V)
Output current
• for signal "1" rated value
0.5 A
• for signal "0" residual current, max.
0.5 mA
Switching frequency
• with resistive load, max.
100 Hz
• with inductive load, max.
0.5 Hz
• on lamp load, max.
1 Hz
Total current of the outputs
• Current per group, max.
4 A
Cable length
• unshielded, max.
30 m
Encoder
Connectable encoders
• 2-wire sensor
Yes
– permissible quiescent current (2-wire
sensor), max.
1.5 mA