Siemens SIMATIC ET 200PA SMART+ - 6.3.6 Channel activated; 6.3.7 Input delay; 6.3.8 Pulse stretching

6.3.6 Channel activated [ID:151040520715]
De󹪝nition
Speci󹪝es whether a channel is activated or deactivated.
6.3.7 Input delay [ID:151040530315]
De󹪝nition
This parameter can be used to avoid signal faults. Changes to the signal are only detected if they
are constantly pending longer than the set input delay time.
For input channels with longer input delays, the read-in time is moved accordingly. This
means individual channels can be assigned input delays, if necessary, without having a
negative impact on the possible cycle time.
6.3.8 Pulse stretching [ID:151040539915]
De󹪝nition
Pulse stretching is a function for changing a digital input signal. A pulse on a digital input is
stretched to at least the con󹪝gured length. If the input pulse is already longer than the
con󹪝gured length, the pulse is not changed.
Parameters
6.3Explanation of the module/channel parameters
DI 16x24VDC PA
24 Equipment Manual, 06/2023, A5E51654101-AA