Getting Familiarized with the SIMATIC Field PG P4
2-4
SIMATIC Field PG P4 Manual
A5E00180080-04
5 Touchpad
The Touchpad has a pressure sensitive surface for precise mouse pointer
positioning.
6 On/OffĆbutton (Power Button)
Use the On/Off pushbutton to switch on the Field PG P4 (into active state) or to
switch it from active to inactive state (Off, Standby or Hibernate). The Power
Button can be parameterized in Windows. The Windows NT versions do not
support this power management.
7 Air venting slots
Here is the ventiduct.
!
Caution
The ventiducts for incoming and outgoing air must not be obstructed. Otherwise,
there is a risk of overheating. Do not operate your device with the display cover
completely closed in order to guarantee optimum cooling.
8 Display interlock
The display unit is connected to the base unit with two locks. The slide interlock is
mounted at the side of the display unit.
Rear view
1532 674
1 USB.
Universal Serial Bus connector. You can use the USB port (2.0) to connect external
devices, for example, CD drives, printers, modems as well as a mouse and
keyboard. The Windows NT versions only support mouse and keyboard.
To Next Page
Loading...
