Siemens SIMATIC Field PG P4 User Manual

Getting Familiarized with the SIMATIC Field PG P4
2-5
SIMATIC Field PG P4 Manual
A5E00180080-04
2 Interface Cable (I Cable)
You can connect the I Cable supplied in the consignment to this port.
S5ĆOnline AG (COM1/TTY)
COM2/V.24
LPT
The I Cable enables the connection to S5 automation devices (COM1/TTY), to
devices with a serial port (COM2/standard V.24) such as a modem or mouse and
to devices with a parallel port (standard LPT) such as a printer or scanner. Please,
use the I Cable on a level surface only (e.g. desk) to prevent contact problems.
!
Caution
Only the I Cable may be connected to this port. If you connect other devices with a
50-pin mini SCSI connectors, your Field PG P4 or the connected device may be
damaged as a result.
3 Ethernet
RJ45 Ethernet connector. Ethernet is a local area network with a bus structure for
data communication with a data transfer rate of 10/100 Mbit per second (Mbps).
4 MPI/DP Multipoint Interface
The MPI/DP interface is isolated from line potential. You can use it to connect the
SIMATIC Field PG P4 to an S7 automation system or to a PROFIBUS network.
5 VGA
Here you can connect an appropriate external monitor.
Caution
Make sure the monitor can handle the resolution and refresh rate settings.
Otherwise, it can result in damage.
6 USB
Second USB port 2.0.
7 DCĆIn 17.5 V
Socket for the DC output plug of the power supply that is included in your
consignment.

Siemens SIMATIC Field PG P4 Specifications

General

Brand	Siemens
Model	SIMATIC Field PG P4
Category	Laptop
Language	English