Siemens Simatic Field PG User Manual

Reinstallation of the Software
8-2
SIMATIC Field PG Manual
A5E00075760-04
8.1 Cause / Remedy
In case of software errors, reinstall your software using the Recovery CD and the
“Backup PG” CD.
To restore all directories and files that were copied to your hard disk at the first set
up proceed as follows:
1. If it is possible to save your authorization proceed as described below.
2. If it is not possible to save your authorization please contact the customer
support hotline (see Getting Started). They will provide you with the information
necessary for your authorization.
Then proceed as described in Section 8.2.
Saving Authorization on Diskettes
Please proceed as follows:
• Insert authorization disk in drive A:
• Click ”Start” on the Windows task bar and
• Select Start > Simatic > AuthorsW > AuthorsW to open the authorization tool
which will help you to save all authorizations on your authorization disk.

Siemens Simatic Field PG Specifications

General

Manufacturer	Siemens
Processor	Intel Core i7
Storage	SSD up to 1TB
Graphics	Intel UHD Graphics 630
Operating System	Windows 10 Enterprise
Display	15.6" Full HD (1920x1080)
Ports	USB 3.0, USB-C, HDMI, Ethernet, Serial Port
Battery	Li-Ion battery