Siemens Simatic Field PG User Manual

Important Notes
1-2
SIMATIC Field PG Manual
A5E00075760-04
1.2 Certificates, Directives and Declarations
Notes on the CE Symbol
The following applies to the SIMATIC product described in this operating
instruction:
EMC Directive
This product fulfils the requirements for the EC directive 89/336/EEC on
“electromagnetic compatibility” and the following fields of application apply
according to this CE symbol:
Field of Application Requirement for
Emitted Interference Noise Immunity
Residential and commercial areas and
small businesses.
EN 50081-1: 1992 EN 50082-1: 1992
Industry EN 50081-2: 1993 EN 50082-2: 1995
The product is also compliant with the Standards EN 61000-3-2:1995 (Harmonic
currents) and EN 61000-3-3:1995 (Voltage fluctuation and flicker).
Low Voltage Directive
This product fulfils the requirements for the EC directive 73/23/EEC on
“low voltage” and was tested to EN60950.
Declaration of Conformity
The EC declarations of conformity and the documentation relating to this are
available to the authorities concerned, according to the above EC directive, from:
Siemens AG
Bereich Automation and Drives
A&D AS RD4
Postfach 1963
D-92209 Amberg
Tel.: 09621 80 3283
Fax: 09621 80 3278
Observing the Setup Guidelines
The setup guidelines and notes on safety given in the manual must be observed
on startup and during operation.

Siemens Simatic Field PG Specifications

General

Manufacturer	Siemens
Processor	Intel Core i7
Storage	SSD up to 1TB
Graphics	Intel UHD Graphics 630
Operating System	Windows 10 Enterprise
Display	15.6" Full HD (1920x1080)
Ports	USB 3.0, USB-C, HDMI, Ethernet, Serial Port
Battery	Li-Ion battery