Siemens SIMATIC HMI KTP700 Basic User Manual

Configuring the device
5.21 Displaying and deleting certificates
Basic Panels 2nd Generation
68 Operating Instructions, 10/2016, A5E33293231-AB
5.21
Displaying and deleting certificates
Requirement
● A Basic Panel with PROFINET interface and an HMI device image compatible with
WinCC (TIA Portal) V14 or higher.
● A USB memory device is connected to the Basic Panel.
Procedure
1.
Touch the "Internet Settings" icon.
2.
Press the "Certificate Store" button.
3.
Select the desired certificate.
4.
If you want to display information
about the selected certificate,
press the "Details" button.
You can delete the selected
certificate on the HMI device
using the "Delete" button.
5.
To close the detailed view of
the certificate, press the "Back"
button.
You can delete the selected
certificate on the HMI device
using the "Delete" button.

Siemens SIMATIC HMI KTP700 Basic Specifications

General

Display Size	7 inch
Display Type	TFT
Resolution	800 x 480 pixels
Touchscreen	Yes
Backlighting	LED
Power Supply	24 V DC
Operating Temperature	0 to 50 °C
Storage Temperature	-20 to 60 °C
Weight	0.8 kg
Color Depth	16-bit
Processor	ARM
Interface	Ethernet
Protection Rating	IP65