Siemens SIMATIC HMI Unified Comfort MTP700 - Page 142

Technical information
8.2 Labels, certificates and approvals
Unified Comfort Panels
142 Operating Instructions, 03/2020, A5E46641217-AA
ATEX approval
For an HMI device with "Ex" marking, the following approvals apply according to the
following standards
.
● Standards:
– EN 60079-0:2018
– EN 60079-7:2015 +A1:2018
– EN 60079-31:2014
● Approvals:
II 3 G
Ex ec IIC T4 Gc
II 3 D Ex tc IIIC T 70 °C Dc
IECEx approval
For an HMI device with "IECEx" marking, the following approvals apply according to the
following standards.
● Standards:
– IEC 60079-0:2017 (Ed. 7)
– IEC 60079-7:2015 (Ed. 5.1)
– IEC 60079-31:2013 (Ed. 2)
● Approvals:
Ex ec IIC T4 Gc
Ex tc IIIC T70°C Dc
IEC 61010-2-201
The devices meet selected requirements and criteria of the IEC 61010 standard, safety
regulations for electrical equipment for measurement, control and laboratory use -
Part 2-201: Special requirements for control equipment.
IEC 61131
The devices meet the requirements and criteria of IEC 61131-2, Programmable Logic
Controllers, Part 2: Operating resource requirements and tests.
RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of EN 61000-6-4 Generic standards –
Emission standard for industrial environments.
This product meets the requirements of the standard EN 61000-6-4 Generic standards –
Emission standard for industrial environments.