Siemens SIMATIC HMI Unified Comfort MTP700 - Dimension drawings

Technical information
8.7 Dimension drawings
Unified Comfort Panels
150 Operating Instructions, 03/2020, A5E46641217-AA
Protection class
Protection class III according to IEC 61010-2-201 und IEC 61131-2.
Protection against foreign objects and water
The device meets the requirements according to IEC 60529 and UL50.
Device side
Degree of protection
Front When mounted:
• IP65 according to IEC 60529
• Type 4X/Type 12 (indoor use only, front face only) according to
UL50
Rear IP20
Protection against contact with standard test probes. There is no
protection against the ingress of water, dust and noxious gas.
The degree of protection at the front can only be guaranteed if the mounting seal lies flush
against the mounting cutout. Observe the corresponding information in section
"Preparing the mounting cutout (Page 33)".
8.7 Dimension drawings
8.7.1 Dimension drawings of the MTP700 Unified Comfort