Configuration and parameter assignment
4.4 Programming via SIMATIC controller
SIMATIC RF120C
Operating Instructions, 02/2021, C79000-G8976-C328-03
25
4.4 Programming via SIMATIC controller
You can program and configure the SIMATIC RF120C communications modules using Ident
instructions via a SIMATIC controller.
To configure Ident systems using STEP 7 Basic / Professional (TIA Portal), you need
appropriate Ident instructions. The Ident library with the Ident profile and the Ident blocks is
integrated in STEP 7 as of version V13. You can find a detailed description of the Ident profile
and the Ident blocks in the "Ident profile and Ident blocks, standard function for Ident
systems (https://support.industry.siemens.com/cs/ww/en/view/109781633)" function manual.
To Next Page
Loading...
