Siemens SIMATIC Ident Operating Instructions

Appendix
A.1 Certificates & approvals
SIMATIC RF120C
Operating Instructions, 02/2021, C79000-G8976-C328-03
39
Country-specific approvals
Safety
If the device has one of the following markings, the corresponding approval has been
obtained.
Marking
Description
Underwriters Laboratories Inc. in accordance with
• UL 508 (Industrial Control Equipment)
The product meets the requirements of the standards according to
AS/NZS 61000.6.4:2007 (Class A).
Additional information is available in the Operating Instructions "S7-
1200 Programmable Controller".
Russia, Belarus and Kazakhstan
South Korea (KCC)
Korea Communications Commission
Certificate of Broadcasting and Communication Equipments
Republic of Korea
KCC-REM-S49-SIMATICRF
ATEX (explosion protection directive)
WARNING
Risk of explosion in hazardous areas
When using SIMATIC NET/SIMATIC Ident products in Zone 2 hazardous areas, it is essential
that you pay attention to the associated special conditions in the document:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous
Area".
You will find this document here:
• On the data medium that ships with some products:
– Product CD / product DVD
– SIMATIC NET Manual Collection
• On the Web pages of Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/view/78381013)

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English