Siemens SIMATIC IPC BX-39A

To Next Page

To Previous Page

Expanding and assigning parameters to the device

6.1 Opening the Device

SIMATIC IPC BX-39A

54 Operating Instructions, 07/2022, A5E50715883-AA

Procedure

Remove the marked screws.

Lift off the front panel.

Put down the front panel.

Close the device in reverse order.

Main Page

Preface3
Table of Contents5
Product Description9
Important Instructions and Manuals for Operating the Device9
Product Highlights11
Applications12
External Design of the Device13
Interfaces and Operating Elements13
Status Displays15
Internal Design of the Device17
Accessories and Spare Parts18
Hardware Accessories18
Software Accessories18
Safety Instructions19
General Safety Instructions19
Note on Transport and Storage21
Notes on Mounting22
Notes on Ambient and Environmental Conditions22
Information on I/O Devices24
Notes on Device and System Extensions25
Installing and Connecting the Device26
Preparing for Installation26
Scope of Delivery26
Checking the Delivery Package27
Identification Data of the Device28
Installing the Device29
Mounting Types29
Securing Device32
Mounting Onto DIN Rail34
Attaching the DIN Rail Bracket34
Mounting on DIN Rails35
Wall Mounting36
Upright Mounting37
Connecting the Device38
Connecting the Protective Conductor38
Connecting the Power Supply39
Connecting the Terminal39
Connecting the 24 V DC Power Supply40
Connecting I/O Devices42
Connecting Expansion Cards43
Connecting the Device to Networks44
Securing the Lines45
Commissioning the Device46
Switching on the Device46
Switching off the Device46
Operating the Device48
Multi-Monitoring48
Monitoring of the Device49
Monitoring Functions49
SIMATIC IPC Diagbase50
SIMATIC IPC Diagmonitor50
Remote Maintenance of the Device51
Remote Maintenance Functions51
Trusted Platform Module (TPM)52
Buffer Memory NVRAM (Optional)52
Operation Without Monitor and Keyboard52
Expanding and Assigning Parameters to the Device53
Opening the Device53
Open Device with Expansion Slots55
Expansion Cards57
Usable Expansion Cards57
Installing/Removing Expansion Cards57
Expansion Modules (M.2)60
Usable Expansion Modules (M.2)60
Installing/Removing Expansion Modules (M.2)61
Memory Modules64
Installing and Removing a Memory Module64
Drives66
M.2 Nvme SSD in the SIMATIC IPC Slider66
Device Maintenance and Repair70
Repair Information70
Maintenance Intervals70
Removing and Installing Hardware71
Changing the Backup Battery71
Installing Operating System, Software and Drivers72
Configuring Firmware/Bios73
Backing up Data and Changing Partitions73
Recycling and Disposal73
Technical Specifications74
Applicability of Technical Specifications74
General Technical Specifications74
Current/Power Requirements and Power Supply76
Current and Power Requirements of the System Components76
Technical Specifications DC Power Supply (DC)77
Electromagnetic Compatibility77
Ambient Conditions78
Technical Specifications of the Drives80
Technical Specifications of the Motherboard80
Technical Specifications of Graphic81
Technical Specifications of the Interfaces81
Technical Specifications of the Operating Systems82
Dimension Drawings83
Dimension Drawing - Mounting on a DIN Rail83
Dimension Drawing - Wall-Mounting84
Dimension Drawing - Vertical Mounting85
Dimension Drawing - Device with Expansion Slots86
Dimension Drawing of the Expansion Cards87
Dimension Drawing of Expansion Modules (M.2)87
Standards and Approvals89
CE Marking89
UKCA Marking90
DIN ISO 9001 Certificate and Software License Agreements90
UL Approval90
Fcc (Usa)91
Canada92
Australia / New Zealand92
Eurasion Customs Union EAC92
Korea92
Taiwan92
Hardware Description93
Motherboard93
Layout of the Motherboard93
Position of the Interfaces on the Motherboard94
Internal Interfaces95
Pin Assignment of the Internal Interfaces95
USB Ports95
Bus Board96
Expansion Card Slots on the Bus Board96
Pin Assignment Power Supply Connection for Expansion Cards97
External Interfaces98
System Resources99
Currently Allocated System Resources99
I/O Address Allocation99
Overview of the Internal Module Registers99
Output Register User LED L1/L2/L3 (Read/Write)100
Battery Status Register (Read Only)101
Watchdog Timer (WDT) Register (Read/Write)102
NVRAM Address Register104
Technical Support105
Service and Support105
Troubleshooting106
Problems with Device Functions106
Problems When Booting the Device108
Problems When Using Expansion Cards108
Markings and Symbols109
Overview109
Safety109
Operator Controls109
Certificates, Approvals and Markings110
Interfaces111
List of Abbreviations112
Abbreviations112
Index114

Siemens SIMATIC IPC BX-39A - Page 54

Table of Contents

Other manuals for Siemens SIMATIC IPC BX-39A

Related product manuals