Device maintenance and repair
7.5 Installing the software
SIMATIC IPC627D/827D
92 Operating Instructions, 09/2014, A5E32990859-AB
Installing drivers and software
Introduction
Note
In the case of multilingual operating systems (MUI versions), you have to set the regional
settings for menus and dialogs and the default language to English (US) before you install
new drivers or operating system updates.
1. If your device has no CD/DVD drive, connect an external USB CD/DVD drive to a USB
port.
2. Insert the "Documentation and Drivers" CD/DVD provided.
3. Start the "START" program.
4. Select "Drivers" from the index.
5. Select the device and operating system.
6. Select the desired driver
7. Open the folder with the driver data by clicking on the link next to "Driverpath".
8. Start the setup program in this folder.
Note
For a new installation of Windows operating systems, the chipset driver must be installed
before all other drivers, if required.
Note
Specific information on using the Windows
operating systems is available in the following
Windows 7, Technical Reference, MS Press No. 5913
The listed manuals are not included in the scope of delivery.
To Next Page
Loading...
Need help?
General
