Network and system integration
4.6 System configuration with CM and RFID reader
SIMATIC MV500
Operating Instructions, 05/2019, C79000-G8976-C494-02
59
4.6 System configuration with CM and RFID reader
Optical sensor or light barrier (for trigger signal)
Figure 4-5 Example: System configuration of optical reader with RFID reader on a communication
module
System characteristics
● In mixed operation with an RFID reader, e.g. from the SIMATIC RF300 series, the optical
reader can be connected to a communication module and operated.
● Both the optical reader and the RFID reader are integrated in STEP 7 by the Ident profile
block.
● A PC/programming device is connected via Ethernet to allow adjustment of the device.
To Next Page
Loading...
