6 Programmed Communication Connections
A-175
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07
Table 6-8 , continued
Subfield Parameter
ID Use
( m
andatory
/ optional)
Special Features / Notes
(Please refer also to the general
description in Table 6-10 Page A-177)
Type
*)
21 SUB_KBUS_ADR This value is always set to 0 for CPs for the
S7-300 and does not need to be specified.
m (for
S7-400)
22 SUB_CON_ESTABL - m
*) The general properties of the subfield types are described below in Section 6.6.
**) The parameters SUB_IP_V4 and SUB_DNS_NAMEare mutually exclusive; one or the other must be
specified.
Note
Mail server ports are well-known ports and do not need to be specified.
To Next Page
Loading...
