Siemens SIMATIC NET S7-300 User Manual

A-292
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07
C References and Literature
Manuals and Further Information
For installation and commissioning of the CP
SIMATIC S7
S7-300 Automation System
- Hardware and Installation: Installation manual
- Module Data: Reference manual
Siemens AG
and
SIMATIC S7
S7-400, M7-400 Automation System
- Hardware and Installation: Installation manual
- Module Data: Reference manual
Siemens AG
For using and configuring the CP
Manual
S7-CPs for Industrial Ethernet - Configuring and Commissioning
Part of
- the manual package NCM S7 for SIMATIC NET CPs
- the online documentation in STEP 7
Siemens AG
For using and configuring the CP
NCM S7 for SIMATIC NET CPs “Primer”
Part of
- the manual package NCM S7 for PROFIBUS
- the online documentation in STEP 7
Siemens AG
SIMATIC NET , Instructions
Commissioning PC Stations
Part of
- the manual package for NCM S7 for Industrial Ethernet
- the online documentation in STEP 7
Siemens AG
/1/
/2/
/3/
/4/

Siemens SIMATIC NET S7-300 Specifications

General

Product Type Designation	SIMATIC NET S7-300
Mounting	DIN rail mounting
Protection Class	IP20
CPU Models	Various models available (e.g., CPU 312, CPU 314)
Communication Interfaces	MPI, PROFIBUS DP
Power Supply	24 V DC power supply required. Different power supply modules available.
I/O Modules	Digital input modules, digital output modules, analog input modules, analog output modules
Programming	STEP 7 software
Supply Voltage	24V DC or 120/230V AC (depending on model)
Digital Inputs	Available via digital input modules
Digital Outputs	Available via digital output modules
Analog Inputs	Available via analog input modules
Analog Outputs	Available via analog output modules
Communication Functions	MPI, PROFIBUS DP, Ethernet (depending on model)
Protocols	MPI, PROFIBUS DP, TCP/IP (depending on model)
Operating Temperature	0°C to 60°C
Storage Temperature	70 °C
Memory	Depends on CPU model (e.g., 32 KB to 1.5 MB)