This manual...
A-9
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07
Information on the Current Block Versions (FCs/FBs)
For new user programs, please make sure that you use the latest block versions.
You will find information on the current block versions and the current blocks to
download from the Internet at:
http://www4.ad.siemens.de/view/cs/en/8797900
If you require replacements, please follow the instructions in the device-specific
Part B of this manual.
SIMATIC NET Quick Start CD: Samples covering all aspects of communication
The Quick Start CD that can be ordered separately is a
treasure-trove of sample programs and configurations.
You can order this directly over the Internet at:
http://www4.ad.siemens.de/view/cs/en/21827955
Additional Information on SIMATIC S7 and STEP 7
The additional documentation on the basic software STEP 7 of the SIMATIC
programmable controllers is included in electronic format in your STEP 7
installation.
You will also find information on SIMATIC programmable controllers on the Quick
Start CD and from the Customer Support Online services at:
http://www.siemens.de/simatic-net General information
or
http://www.ad.siemens.de/csi/net Product information and downloads
To Next Page
Loading...
