Siemens SIMATIC PANEL PC 877 - Safecard on Motherboard (SOM)

Functions
11.2 Safecard on Motherboard (SOM)
SIMATIC Panel PC 877
11-2 Operating instructions, Release 07/2006, A5E00877780-01
11.2 11.2 Safecard on Motherboard (SOM)
The "Safecard On Motherboard" software is available on the "Documentation and Drivers"
CD. Before this software is installed, previously installed DiagMonitor software must be
deinstalled.
This application is used to monitor PC hardware (temperature, watchdog and fans) and to
display the current measured values. A GUI is used to configure the application and also to
activate the temperature monitoring watchdog function and fan monitoring function.
Your device is equipped with three temperature sensors, which are automatically detected
by the application.
 D E
F
 
D
E
Figure 11-1 Safecard On Motherboard with three temperature sensors