Siemens SIMATIC PANEL PC 877 - BIOS Setup Default Settings

Detailed descriptions
17.6 BIOS setup
SIMATIC Panel PC 877
17-66 Operating instructions, Release 07/2006, A5E00877780-01
17.6.11 BIOS setup default settings
Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you made your entries.
BIOS Setup default settings
System parameters Defaults Custom entries
Main
System Time hh:mm:ss
System Date MM/DD/YYYY
IDE Channel 0 Master 257MB
IDE Channel 0 Slave None
SATA Port 0 120GB SATA1
SATA Port 1 None
SATA Port 2 None
SATA Port 3 None
Memory Cache Write Back
Boot Options
Quick Boot Mode Enabled
SETUP prompt Enabled
POST Errors All, but not keyboard
Summary screen Enabled
Diagnostic screen Enabled
Post Code/Status LPC Bus